JB-A01 Rapid and Wide Temp. Anodizing Additive

uProduct Features

1.It can work in the range of 18-35 ℃ and do not refrigeration, you can use tap water .

2.Oxidation current can work in the range of 1.0-3.0A/dm²。

3.The tolerance of AL3 +, Cu2 +, Fe3 +is more than one time. Oxidation rate also increased to 0.4~1.0μm/min。

uTank set up parameters

硫酸：150～180g/l

JB-A01： 35±5 g/l

uControlling parameters

Free acid:140～160g/lAL³+ ：1～30g/l

JB-A01： 35±5 g/lCurrent density ：1.0～2.0A/dm2

Voltage ：10～18 V

Temperature ：20~35℃

uMaintenance and control

1.In normal anodizing film thickness(10um), the consumption of JB-A01 is 3～4 kg/ton; the consumption will increase according to film thickness.

2.JB-A01 is difficult to dissolve in cold water; the chemical should be dissolved first in other medium before adding to the tank, this will prevent condensation and waste.

uPackage and Storage

25kg carton pack；Protect form heating, avoid alkali, keep sealed in a dry, cool place and prevent leakage. The product should be or more than one year before expiration date under room temperature.