English
Currency CNY
Wireless microphone manufacturer from enping city buy in Enping
Buy Wireless microphone manufacturer from enping city
Wireless microphone manufacturer from enping city

Wireless microphone manufacturer from enping city

Products from producer
In stock
Price:
100 CNY
Shipping:
Seller
China, Enping
(View map)
+86( 
Display phones
Technical characteristics
  • Manufacturerealsem
  • Brandealsem
  • Country of manufactureChina
  • Microphone typeDynamic
  • Year of harvestcolor box
  • ConditionNew
  • Packagingcolor box
Description

Specifications
1.wireless system
2.200 frequency adjustable
3.Receiver and handheld is iron material
4..Anti-jamming circuit

UHF-839 frequency wireless microphone

System parameter Carrier frequency:UHF 735-806MHZ Modulaton mode:FM Channel number:2 channel,random set 200 frequency wireless microphone Frequency interval:250KHZ Frequency stability:+/-0.005% Dynamic range:100dB Max modulation:+/-55KHZ Frequency response:70HZ-18KHZ(+/-3dB) S/N rato:>105dB THD: ≤ 0.5% Working range:About 100M(without obstacle) Receiver Receiver mode:Heterodyne frequency comversion receiver Intermediate frequency:130.4MHZ,10.7MHZ Antenna switch in:BNC/50 Ω Sensitivityadjust range:-103dB RF squelch: ≥ 85dB Max level output:+/-10dB/v Transmitter Antenna:Handheld microphone with built-in screw antenna,pocket transmitter with 1/4' wavelengh scourge antenna Output power:30mV RF squelch:60dB Power:2*1.5V AA Battery life:About 10 hours Receiver operation way 1. Set up the antenna 1&2, pull the antenna 1&2 and make the angle 90 by it and receiver 2. Connect with AC/DC power jack. 3. Audio output connection: Mix-Unbalance output connection: Plug the end of audio cable jack into the UN BALANCE OUT: 1&2, plug another end into the MIC IN or AUX IN socket into mixer. 4. Open the power and the power indication light will shining. 5. When the switch of microphone on the ON location, the RF signal of receiver will shining; When the receiver output the voice, the volume can control by the knob. Transmitter operation way: 1. Open battery cover, put 1 × 9V battery, then fasten battery cover. 2. Put the power to "PWR ON" position, the green indicate light is bright when the battery is normal. The red indicate light low-bat is bright, the batter only can use one hour or less. The two light is not bright; the battery has run down or load wrong. Please change or load again. 3. Put the power to middle (STB position), it is mute function. 4. Not use, Please put the switch to off position, please take away the battery when not use for long time. Avoiding to battery liquid leak out and damage the battery and parts. 5. Volume increased button, increase volume adjust so that can suit different machine. 6. When turn on the transmitter, the receiver have not RF, please check the transmitter the frequency with receiver, otherwise reset Parts detail Receiver Transmitter Audio connector cable Built out power adopter battery Instruction Guarantee card
Contact the seller
Wireless microphone manufacturer from enping city
Wireless microphone manufacturer from enping city
Shipping method
Compare0
ClearSelected items: 0